Manuel Cube Sugar Production Plant

>>SUGAR
Granulated sugar is poured into bouncer.
It is carried to the upper bouncer by means of helix.
It flows from the upper bouncer into the mixer.
Water is injected into the mixer together with sugar.
The sugar mixed with water in the mixer is poured in the mould feeder.
Filling is made into the moulds by means of the filling fingers in the mould feeder.
Weight volumetric adjustment in grams is applied to the sugar filled in the moulds.
The excessive weight of the sugar adjusted in grams is taken by the scraper plate.
The sugar adjusted by weight in grams is ready for the press.
It is pressed by being compressed between the press cam and the press plate.
The pressed sugar is put on the wire band.
After the cube sugar is put on the band, the moulds are cleaned by the brush bowl and brush.
This process keeps on throughout the period that the machine operates synchronously.

>>DRYING TUNNEL
While the cube sugar poured on the band is advancing towards the end of the band, the rate of its humidity is reduced by means of the infrared resistances.Drying is provided.The dried sugar goes through the cooling cabin, its temperature drops, and it rests.